HFD2 Breacher / Standoff device fits Mossberg 500 12 Gauge / M5S12

Description

Do you REALLY want to spend 0.00 + on a breacher barrel?
This model is designed specifically for the Mossberg 500 and will cost effectively allow you a standoff / breaching option as well as an aggressive less-lethal deterrent, by simply attaching to your Take Down Screw.
This model, the M500-S-12, is designed to fit a 12 gauge shotgun with an EQUAL LENGTH barrel to mag tube ratio, such as commonly found on the Mossberg 500 Persuader with a 20" barrel.
This "Pumkin Puncher" will also fit the Mossberg Maverick 88 and similar shotguns with the 1" steel take-down screw on the front of the mag tube.
If you have an older Take Down Screw that is approximately 1/4" thick, you would need to replace it with a newer, 3/8" thick TDS from Mossberg or Uncle Mikes...
It has an OAL of 2.630 with a standoff length, measured from the face of the TDS to the ends of the teeth, of 2.247.
The major OD is 1.250. All dimensions are approximate.
Please see our other listings for more HFD2 products.
The “Pumkin Puncher” is machined from 6061 T6 aluminum, and as such. machining marks may be present on some items. They are anodized flat black and branded. A quick swipe with a black permanent ink pen will camouflage the etching if you so desire.
What you’ll receive:
The stated device, instructions, all necessary machine screws, washers, allen screws and hex wrenches for your specific item along with a pack of VC-3 thread lock. You will need a phillips screwdriver and/or a 3/8” socket or similar. A very easy install.
Shipping to the continental U.S.A. ONLY. Shipping is FREE.
We encourage you to check our feedback and ASK ANY QUESTIONS you might have about our products. They will be answered as soon as possible.
NO WARRANTY EXPRESSED OR IMPLIED!
PURCHASER / OPERATOR ASSUMES ALL RISKS RELATED TO THE USE OF THIS DEVICE!
“U.S. Pat. No.
9,291,418
”